round_carcale
Comprehensive Heating Services to Keep Your Home Warm
round_carcale
round_carcale
round_carcale

HVAC Service and Installation

Residential Heating Systems in NJ - John Duffy Energy Services
round_carcale
round_carcale

Service Plans Save Money and Energy

round_carcale
  • Heating Oil Plan
  • Natural Gas Plan
  • A/C & Heat Pump Plan
  • Choose the Plan that's right for you
  • Silver
  • Gold

Silver Service Plan

Great Discounts!

  • annual tune-up
  • 50% off diagnostic fee
  • no overtime charges
  • 15% off repairs
  • priority service

I want To Enroll Now

Gold Service Plan

Great Savings!

  • annual tune-up
  • FREE diagnostics
  • no overtime charges
  • parts and labor covered 100% (listed parts)
  • priority service

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

Silver Service Plan

Great Discounts!

  • annual tune-up
  • 15% off repairs
  • 50% off diagnostic fee
  • priority service
  • no overtime charges

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

15-Point Precision Heating Tune-Up

A tune-up will be performed once during the service plan term during regular working hours. Please call to schedule. The tune-up includes the following:

  1. Clean heating unit, vent pipe and chimney base (where accessible).
  2. Adjust burner for maximum efficiency.
  3. Clean and adjust electrode and nozzle assembly.
  4. Clean or replace oil pump strainer.
  5. Lubricate all motors, bearings, fans and circulators.
  6. Replace oil nozzle and oil filter.
  7. Test and adjust all safety and operating controls.
  8. Inspect flue pipe, barometric damper and combustion chamber.
  9. Test oil pump operation.
  10. Check blower operation.
  11. Change air filter(s), if applicable (provided by customer).
  12. Check oil tank and lines.
  13. Test and tighten all electrical wiring connections.
  14. Check thermostat operation.
  15. Inform customer of equipment condition.

Gold Service Plan

Great Savings!

  • annual tune-up
  • parts and labor covered 100%(listed parts)
  • FREE diagnostics
  • priority service
  • no overtime charges

During the life of this plan, the following parts will be repaired or replaced at no charge for Gold Plan customers. Silver Plan customers receive a 15% discount.

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

15-Point Precision Heating Tune-Up

A tune-up will be performed once during the service plan term during regular working hours. Please call to schedule. The tune-up includes the following:

  1. Clean heating unit, vent pipe and chimney base (where accessible).
  2. Adjust burner for maximum efficiency.
  3. Clean and adjust electrode and nozzle assembly.
  4. Clean or replace oil pump strainer.
  5. Lubricate all motors, bearings, fans and circulators.
  6. Replace oil nozzle and oil filter.
  7. Test and adjust all safety and operating controls.
  8. Inspect flue pipe, barometric damper and combustion chamber.
  9. Test oil pump operation.
  10. Check blower operation.
  11. Change air filter(s), if applicable (provided by customer).
  12. Check oil tank and lines.
  13. Test and tighten all electrical wiring connections.
  14. Check thermostat operation.
  15. Inform customer of equipment condition.

Hot Water System

  1. air vent
  2. aquastat
  3. circulator bearing assembly
  4. circulator coupling
  5. circulator impeller
  6. circulator motor (1⁄4 hp max)
  7. circulator relay
  8. pressure reducing valve
  9. pressure relief valve
  10. pressure/ temperature gauge
  11. reverse aquastat
  12. triple aquastat
  13. zone valve
  14. zone valve motor

Steam Systems

  1. gauge glass
  2. gauge glass washers
  3. low water cut-off
  4. pressure control
  5. pressure gauge
  6. pressure relief valve

Oil Systems

  1. blast tube
  2. burner coupling
  3. burner motor
  4. cad cell assembly
  5. cad cell relay
  6. delayed oil valve
  7. electrodes
  8. end cone
  9. exposed oil line fittings
  10. exposed oil lines
  11. fan wheel
  12. fuel filter assembly
  13. fuel pump strainer
  14. ignition transformer
  15. nozzle
  16. nozzle adapter
  17. nozzle line
  18. oil pump
  19. oil shut-off valve
  20. oil tank alarm
  21. oil tank fill cap
  22. oil tank gauge
  23. oil tank vent

Warm Air Systems

  1. air filter (1″ customer supplied)
  2. blower belt
  3. blower motor (1⁄2 hp max)
  4. blower motor pulley
  5. fan and limit control
  6. fan control center

Other

  1. automatic flue damper
  2. emergency switch
  3. flue damper
  4. flue pipe
  5. fuses
  6. thermostat
  • Choose the Plan that's right for you
  • Silver
  • Gold

Silver Service Plan

Great Discounts!

  • annual tune-up
  • 15% off repairs
  • 50% off diagnostic fee
  • priority service
  • no overtime charges

I want To Enroll Now

Gold Service Plan

Great Savings!

  • annual tune-up
  • parts and labor covered 100% (listed parts)
  • FREE diagnostics
  • priority service
  • no overtime charges

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

Silver Service Plan

Great Discounts!

  • annual tune-up
  • 15% off repairs
  • 50% off diagnostic fee
  • priority service
  • no overtime charges

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

15-Point Precision Heating Tune-Up

A tune-up will be performed once during the service plan term during regular working hours. Please call to schedule. The tune-up includes the following:

  1. Test carbon monoxide levels.
  2. Clean and adjust burner and inspect heat exchanger.
  3. Check thermostat operation.
  4. Lubricate all motors, bearings, fans and circulator pumps.
  5. Clean pilot assembly.
  6. Install one 1-inch air filter supplied where applicable).
  7. Test and adjust operation of safety and operating controls.
  8. Inspect flue pipe and gas valve.
  9. Check blower motor (and belt if applicable).
  10. Test and tighten all wiring and connections.
  11. Turn exposed dampers to heating position if marked (no balancing).
  12. Flush condensate drain to protect against overflow.
  13. Check temperature rise.
  14. Check fan speeds.
  15. Inform customer of equipment condition. Recommend necessary repairs.

Gold Service Plan

Great Savings!

  • annual tune-up
  • parts and labor covered 100%(listed parts)
  • FREE diagnostics
  • priority service
  • no overtime charges

During the life of this plan, the following parts will be repaired or replaced at no charge for Gold Plan customers. Silver Plan customers receive a 15% discount.

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

15-Point Precision Heating Tune-Up

A tune-up will be performed once during the service plan term during regular working hours. Please call to schedule. The tune-up includes the following:

  1. Test carbon monoxide levels.
  2. Clean and adjust burner and inspect heat exchanger.
  3. Check thermostat operation.
  4. Lubricate all motors, bearings, fans and circulator pumps.
  5. Clean pilot assembly.
  6. Install one 1-inch air filter supplied where applicable).
  7. Test and adjust operation of safety and operating controls.
  8. Inspect flue pipe and gas valve.
  9. Check blower motor (and belt if applicable).
  10. Test and tighten all wiring and connections.
  11. Turn exposed dampers to heating position if marked (no balancing).
  12. Flush condensate drain to protect against overflow.
  13. Check temperature rise.
  14. Check fan speeds.
  15. Inform customer of equipment condition. Recommend necessary repairs.

GAS BURNER PARTS

  1. burner orifice
  2. burner tube
  3. draft inducer fan motor
  4. flame sensor
  5. gas valve
  6. ignition module
  7. pilot assembly
  8. primary control
  9. roll out switch
  10. thermocouple
  11. transformer

STEAM SYSTEMS

  1. gauge glass
  2. gauge glass washers
  3. low water cut-off
  4. pressure control
  5. pressure gauge
  6. pressure relief valve

HOT WATER SYSTEMS

  1. air vent
  2. aquastat
  3. circulator bearing assembly
  4. circulator coupling
  5. circulator impeller
  6. circulator motor (1/4 h.p. max)
  7. circulator relay
  8. pressure reducing valve
  9. pressure relief valve
  10. pressure/ temperature gauge
  11. reverse aquastat
  12. triple aquastat
  13. zone valve
  14. zone valve motor

WARM AIR SYSTEMS

  1. air filter (1-inch, customer supplied)
  2. blower belt
  3. blower motor (1/2 hp max)
  4. blower motor pulley
  5. fan and limit control
  6. fan control center

Other

  1. automated flue damper
  2. emergency switch
  3. flue damper
  4. flue pipe
  5. fuses
  6. thermostat
  • Choose the Plan that's right for you
  • Silver
  • Gold

Silver Service Plan

Great Discounts!

  • annual tune-up
  • 15% off repairs
  • 50% off diagnostic fee
  • priority service
  • no overtime charges

I want To Enroll Now

Gold Service Plan

Great Savings!

  • annual tune-up
  • parts and labor covered 100% (listed parts)
  • FREE diagnostics
  • priority service
  • no overtime charges

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

Silver Service Plan

Great Discounts!

  • annual tune-up
  • 15% off repairs
  • 50% off diagnostic fee
  • priority service
  • no overtime charges

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

14-Point Annual Tune-Up

A tune-up will be performed once during the service plan term during regular working hours. Please call to schedule. The tune-up includes the following:

  1. Lubricate all moving parts.
  2. Check operating pressures and temperatures.
  3. Clean or replace air filters (provided by customer).
  4. Measure refrigerant superheat/subcooling to fine-tune its charge.
  5. Flush condensate drain to protect against overflow.
  6. Clean outdoor condenser coil.
  7. Clean and check blower motor (and belt if applicable).
  8. Test temperature drop at return and supply air; adjust blower speed as needed.
  9. Safety test all controls for proper operation.
  10. Check voltage and amperage in all motors; test for worn bearings.
  11. Check condition of compressor contacts.
  12. Inspect start and run capacitors and relays for bulges, rust and leaks.
  13. Check and safety test all wires and connections.
  14. Inform customer of equipment condition; recommend necessary repairs or comfort improvements.

Gold Service Plan

Great Savings!

  • annual tune-up
  • parts and labor covered 100%(listed parts)
  • FREE diagnostics
  • priority service
  • no overtime charges

During the life of this plan, the following parts will be repaired or replaced at no charge for Gold Plan customers. Silver Plan customers receive a 15% discount.

I want To Enroll Now

Loyalty Credits

For each consecutive year you are enrolled in our Silver or Gold Plan, you earn $50 in Loyalty Credits.  You can accumulate up to $500 in credits and apply them to the following equipment purchased from us.

boiler$500
furnace$350
central a/c system$350
heat pump$350
humidifier/air cleaner$100
indirect water heater$100
gas water heater$50

14-Point Annual Tune-Up

A tune-up will be performed once during the service plan term during regular working hours. Please call to schedule. The tune-up includes the following:

  1. Lubricate all moving parts.
  2. Check operating pressures and temperatures.
  3. Clean or replace air filters (provided by customer).
  4. Measure refrigerant superheat/subcooling to fine-tune its charge.
  5. Flush condensate drain to protect against overflow.
  6. Clean outdoor condenser coil.
  7. Clean and check blower motor (and belt if applicable).
  8. Test temperature drop at return and supply air; adjust blower speed as needed.
  9. Safety test all controls for proper operation.
  10. Check voltage and amperage in all motors; test for worn bearings.
  11. Check condition of compressor contacts.
  12. Inspect start and run capacitors and relays for bulges, rust and leaks.
  13. Check and safety test all wires and connections.
  14. Inform customer of equipment condition; recommend necessary repairs or comfort improvements.
  1. blower motor
  2. compressor (under warranty)
  3. condensate pump
  4. condenser coil (under warranty)
  5. condenser fan blade
  6. condenser fan motor
  7. contactor
  8. expansion valve (under warranty)
  9. high pressure switch
  10. indoor fan control board
  1. low pressure switch
  2. motor protector
  3. run capacitor
  4. standard air filter (customer supplied)
  5. start capacitor
  6. thermostat
  7. thermostat subbase (standard)
  8. time delay control
  9. timer relay
  10. transformer
  11. wiring in condensing unit
round_carcale

Protect Your Home With a Standby Generator